The Prisma Plus G functional system can be used for all types of low-voltage
distribution switchboards (Submain & Final Distribution) up to 630 A, in commercial and industrial environments.

The components of the Prisma Plus system and those of the functional units in particular have been designed and tested taking into account device characteristics.This design approach ensures a high degree of reliability in system operation and optimum safety for personnel.

The complete accessibility of all mounting and connection points facilitates assembly and cabling in the workshop. The functional units are clearly identified: operations are intuitive and reliable, and connection and checking are performed naturally

Can be dismantled,combine side by side,eight heights from 330 to1380mm
(Wall Mounted Enclosures) and 1530 to 1830 (Floor Standing Enclosures)
widths : w= 595mm fucntional section
width of duct =305mm can be combine side by side.
depth= 250 mm with door

And it has the advantages of the followings:

i. Made up of Centralised distribution blocks and vertical
busbars installed on the side or in the rear of the switchboard

ii. Each device is part of a functional unit comprising-
A dedicated Mounting plate for device installation
A front plate to block direct access to live parts
Prefabricated busbar connections

iii. The functional units are modular and are arranged rationally, one on top of another, within the enclosure.

iv. The system includes everything required for functional unit mounting, supply and on site connection.

 

• rated insulation level of main busbars : 1000 V
• rated peak withstand current Ipk: 53 kÂ
• rated short-time withstand current Icw: 25 kA rms / 1 sec
• Frequency: 50/60 Hz.
• Degree of Protection : IP 30, IP 31, IP 43, IP 55
• Colour RAL 9001 White